Posted by jbmason (65.169.144.249) on July 25, 2003 at 10:33:16:
In Reply to: Slippery Steps posted by Steve Ball on July 24, 2003 at 20:15:31:
#826 was set-up by the dealer and walnut shell was used with varnish or other finish over the bonded shell material. Results look good as all of the coloring is matching and uniform to the existing steps.
: We would like to install a non-skid surface that is reasonably attractive on our companionway steps. Has anyone had experience with this? The only thing I have found to date is black, white or gray pressure sensitive tape.
: Steve Ball
: Hull 559
: Holland Michigan